Heavy duty powder coated chassis for durable long lifeRight and left side throwing ports are adjustable so you can customize your spread patternHigh torque 12 volt motorComplete with plastic coverUPS shippableHopper will hold approximately 2 cubic feet of productThe gate is made to be held open manually to give the operator more control. Pull rope can be rigged to tie to vehicle to hold open for larger areas.Mounting kit required, sold separately
Mounting kit includes a power cord with on/off switch, shut off activation cord and mount. Item 77010 for truck mount, 77011 for ATV/Universal mount kit, 77013 for Gator mount. For riding mowers or tractors see FAQ section. Truck must have a two inch receiver to use 77010 truck mount kit.Effective Spreading Width usually around 7-12ft, but it depends on the mounted height of spreader, rate of travel, weather conditions, cleanliness of impeller, volume/density/coatings/particle size of the material being spread.
100lb/45Kg Hopper capacity - rustproof poly constructionEV-N-SPRED® PRO Dual Port Adjustable Shut-Off System150lb/67Kg Load bearing capacity - what the frame will supportEpoxy Powder Coated ChassisWiring harness with On/Off motor control switch includedIntegrated vertical quick-connect mounting system (mount is required)Rain Cover includedFully assembled5-Year Limited WarrantyOptional Motor Speed Control - #77009
Product is covered by a manufacturer's 5-year warranty, see Manual for details.
Can the 12V spreader be used with mowers?
Yes, with some fabrication. It is recommended to purchase the spreader as well as the universal mounting kit, #77011. An additional plate may have to be fabricated in order to mount to the mower.
How high should you mount it?
Mount it so the impeller 15 to 24 inches off the ground.