• Write a Review

Toro Irrigation 5/8in Tubing Brown 100ft Coil, Pressure Compensating Emitters @ 12in .53GP

# PCB-5181
In Stock
14 @ $ 59.99
> 5 @ $ 56.99
Weight: 14.000000 lbs
Built-in pre-spaced emitter tubing. Patented, flow regulated emitters are pressure compensating for a constant discharge between pressure ranges of 10-60 psi. Ideal for difficult topographical conditions, low and varying water pressures, and long lateral runs. High resistance to plugging. Each emitter has a diaphragm, which flushes out particles during startup, irrigation, and shutdown, ensuring continued reliability and performance. Deep turbulent passageways and raised inlets help prevent particles passing into the emitter. Highly chemical resistant to withstand most common ag chemicals, fertilizers, and chlorine. Manufactured from the highest quality materials. 5/8" tubing is black with a blue stripe to identify Toro quality. Priced per coil. Filtration is required.

Specs

  • Pressure Compensating Drip Emitter tube comes in either 100' or 500'
  • 5/8" diameter
  • Pre-set gallon-per-hour rates (.53 or 1.0)
  • 12" spacing on emitters
  • Built-in pre-spaced pressure compensating emitters operate at consistent flow rates at pressures between 0-60 psi

Product Features

This Brown Poly Tubing is flexible enough to handle gentle curves on its own. It can also be easily cut to shorter lengths with a pair of pruning shears, or heavy duty scissors. You can install "T"s (our #LC58T) or Couplers (our #LC58C) or 90-degree elbows (our #LC58E) for sharp corners. Warming the Poly Tubing in a cup of hot water makes the installation of these fittings much easier.

Product Benefits

The advantage of the brown tubing is the user can hide it in the landscaping

Review Summary

Customer Reviews for Toro Irrigation 5/8in Tubing Brown 100ft Coil, Pressure Compensating Emitters @ 12in .53GP

No Reviews

Built-in pre-spaced emitter tubing. Patented, flow regulated emitters are pressure compensating for a constant discharge between pressure ranges of 10-60 psi. Ideal for difficult topographical conditions, low and varying water pressures, and long lateral runs. High resistance to plugging. Each emitter has a diaphragm, which flushes out particles during startup, irrigation, and shutdown, ensuring continued reliability and performance. Deep turbulent passageways and raised inlets help prevent particles passing into the emitter. Highly chemical resistant to withstand most common ag chemicals, fertilizers, and chlorine. Manufactured from the highest quality materials. 5/8" tubing is black with a blue stripe to identify Toro quality. Priced per coil. Filtration is required.