One component coating prevents permanent staining!
The OKON ready-to-use coating prevents graffiti from penetrating and permanently staining a variety of surfaces including concrete, brick, wood, metal, fiber glass, painted surfaces, and more. This one component coating goes on clear, with a low-sheen, and makes graffiti easy to remove.
Graffiti Barrier Coat is a low viscosity, ready-to-use product. Stir, do not shake. Apply when air and surface temperatures are between 50-90°F (10-32°C) and the relative humidity is below 85%. It can be applied by brush, roller, or garden-type sprayer but is best applied using HVLP or airless spray. Apply multiple thin coats at the recommended application rate to avoid running. OKON appears milky-white when first applied but dries water-clear to a satin finish, depending on the texture of the substrate and number of coats applied.
This is a 1-gallon container. See Attached TDS sheet or the item label for further application details. Made in the USA!
READ MORE...
Product Information
Product Specs
Formulation: Read-to-use
Size (gallons): 1
Product Warranty Information
This product is covered under A.M. Leonard's exclusive 30-Day Down to Earth Guarantee. Click Here for more Details.
Product Features
Ready-to-use coating prevents graffiti from penetrating and permanently staining a variety of surfaces
one component coating goes on clear with a low-sheen
For use as a preventative maintenance product that makes graffiti easy to remove
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, please see www.P65Warnings.ca.gov