• Write a Review

Pro Series 5/8-inch Soaker Hose, 200 ft Runs

Slow, even watering without runoff or evaporation.

A great all-around hose. It has 5/8-inch outside diameter and 1/2-inch inside diameter. Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers. This hose will perform up to 200 foot runs. The double-thick sidewall allows more even water distribution: 50-foot has nickel-plated hose ends, but the 250-foot is standard with no ends.

The Pro Series is kink and crush resistant and will not freeze. We recommend that you either cover the hose with mulch or bury it up to 6 inches deep for longest life.
  • Target Flow 4.65 Gal/Min per 50' based on a 10Gal/Min 40PSI Source
  • Weight: 0 lbs
    Item # Description Ship wt Stock Status 1 – 4 5 + Qty
    GW50 50 ft coupled hose 8 lb In Stock $25.99 $23.99
    GW250 250 ft bulk uncoupled hose 21 lb In Stock $83.99 $80.99

    Specs

    • 1/2" inner diameter
    • Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers

    Product Features

    • Produced from 100% recycled rubber

    Warranty

    A.M. Leonard's down to earth guarantee. This product is covered under A.M. Leonard's full one year warranty against manufacturer defects for products when used under normal conditions.

    Review Summary

    Customer Reviews for Pro Series 5/8-inch Soaker Hose, 200 ft Runs

    No Reviews

    Slow, even watering without runoff or evaporation.

    A great all-around hose. It has 5/8-inch outside diameter and 1/2-inch inside diameter. Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers. This hose will perform up to 200 foot runs. The double-thick sidewall allows more even water distribution: 50-foot has nickel-plated hose ends, but the 250-foot is standard with no ends.

    The Pro Series is kink and crush resistant and will not freeze. We recommend that you either cover the hose with mulch or bury it up to 6 inches deep for longest life.
  • Target Flow 4.65 Gal/Min per 50' based on a 10Gal/Min 40PSI Source