• Write a Review

Underground Root Ball Support Kit, 3-Inch Diameter

# EK680
In Stock
13 @ $ 44.99
> 4 @ $ 41.99
Weight: 2.250000 lbs

A 100% underground root ball support system!

Better Bilt Products designed their underground root ball support kits to secure trees and shrubs in place by the root mass. They keep new plantings in a straight, upright position with none of the problems of traditional cabling systems.

Use this kit for anchoring plants in locations where staking and cabling is unsafe or simply not an option. They are great for anchoring plants in tight areas or along walkways and roads. They provide a much safer setup for public areas like parks and schools!

This kit provides all of the components needed to anchor one 3-inch diameter tree. The total weight must not exceed 1,100 pounds. Each kit includes:
  • (3) Earth anchors & pre-assembled with wire cables and D-rings
  • (1) Hand-ratchet strap
Installation instructions:

Step One: Dig out the area — allow for extra work space to install the anchor points.

Step Two: Drive the earth anchor into the ground until only the cable loop and D-ring remain above ground.

Step Three: Set the anchor by pulling up on the D-ring until you notice no additional movement.

Step Four: Position the tree in the center of the anchor points.

Step Five: Thread the strap through the D-rings in the desired pattern.

Step Six: Tighten the strap and backfill!

Specs

  • Tree diameter (inches): 3
  • Weight capacity (pounds): 1,100
  • Ratchet strap length (feet): 20
  • Ratchet strap load (pounds): 500

Product Features

  • Includes 3 pre-assembled #680 earth anchors
  • Each anchor includes 30 inches of 1/8-inch wire cable and D-ring attached
  • Installation instructions included on packaging

Review Summary

Customer Reviews for Underground Root Ball Support Kit, 3-Inch Diameter

No Reviews

A 100% underground root ball support system!

Better Bilt Products designed their underground root ball support kits to secure trees and shrubs in place by the root mass. They keep new plantings in a straight, upright position with none of the problems of traditional cabling systems.

Use this kit for anchoring plants in locations where staking and cabling is unsafe or simply not an option. They are great for anchoring plants in tight areas or along walkways and roads. They provide a much safer setup for public areas like parks and schools!

This kit provides all of the components needed to anchor one 3-inch diameter tree. The total weight must not exceed 1,100 pounds. Each kit includes:
  • (3) Earth anchors & pre-assembled with wire cables and D-rings
  • (1) Hand-ratchet strap
Installation instructions:

Step One: Dig out the area — allow for extra work space to install the anchor points.

Step Two: Drive the earth anchor into the ground until only the cable loop and D-ring remain above ground.

Step Three: Set the anchor by pulling up on the D-ring until you notice no additional movement.

Step Four: Position the tree in the center of the anchor points.

Step Five: Thread the strap through the D-rings in the desired pattern.

Step Six: Tighten the strap and backfill!

You May Also Like

New! Leonard Cultihoe
Retail Price $54.99
SEE CHOICES