Perma Pak Concrete Paver Edging Additive, 1lb Bag by PERMA Paver Edging
In stock
SKU
PE-PAK
$16.99
SEE ALL TIER PRICING
Buy 3 for $16.99 each and save 0%Buy 6 for $16.99 each and save 0%
READ MORE...
Product Information
Product Specs
- Bag weight: 1lb
Product Features
- Convenient 1lb package blends with standard concrete mix to provide the best paver edging restraint
- Makes standard concrete over 700% more flexible
- Waterproofing throughout the entire concrete volume improves resistance to hydrostatic pressure
- Greatly reduces cracks related to drying and autogenous shrinkage
- Substantially improves concrete durability and life cycle
- Dramatically increases compressive and flexural strength, reduces permeability to increase the life of concrete
- Macro Synthetic Fibers reduce shrinkage and settlement cracking, while enhancing residual strength, impact resistance, and durability of concrete
Product Shipping Weight
- 1 pounds
Frequently Asked Questions
1. What are the application rates for Perma Pac?
The Application rates are as follows:
(1) 1lb Perma Pak per (1) 50-60lb bag of concrete mix
(3) 1lb Perma Paks per (2) 80lb bag of concrete mix
*A standard concrete consisting of gravel, sand, and Portland cement should be used. Recommended use of 3000psi (or higher) strength concrete mix.
2. How do I mix Perma Pac?
First, empty your concrete mix into wheelbarrow or mixing trough. Next, empty the entire contents of Perma Pak and blend for 1 minute minimum. Once blended, add the water recommended by the concrete mix manufacturer. Mix to a thick, oatmeal consistency.
3. How do I perform installation using a Perma Pac mix? Remove the bedding layer (sand, pea gravel, or chips) along the pavers edge prior to installation. Use a scoop shovel or transfer shovel to scoop the material and apply to the pavers edge. Use a hand trowel or concrete finishing trowel (standard 4in x12in recommended) to smooth along the pavers edge. Stay low on the paver and do not exceed 1/3 of the paver height from the bottom. Sand infill followed by compacting is recommended while the edge is wet for best results.
4. How much mix does a Perma Pack yield? Open graded base - (1) 1lb Perma Pak per (1) 50-60lb bag of concrete mix = 12ft to 16ft of edging
Dense base - (1) 1lb Perma Pak per (1) 50-60lb bag of concrete mix = 17ft to 21ft of edging
The Application rates are as follows:
(1) 1lb Perma Pak per (1) 50-60lb bag of concrete mix
(3) 1lb Perma Paks per (2) 80lb bag of concrete mix
*A standard concrete consisting of gravel, sand, and Portland cement should be used. Recommended use of 3000psi (or higher) strength concrete mix.
2. How do I mix Perma Pac?
First, empty your concrete mix into wheelbarrow or mixing trough. Next, empty the entire contents of Perma Pak and blend for 1 minute minimum. Once blended, add the water recommended by the concrete mix manufacturer. Mix to a thick, oatmeal consistency.
3. How do I perform installation using a Perma Pac mix? Remove the bedding layer (sand, pea gravel, or chips) along the pavers edge prior to installation. Use a scoop shovel or transfer shovel to scoop the material and apply to the pavers edge. Use a hand trowel or concrete finishing trowel (standard 4in x12in recommended) to smooth along the pavers edge. Stay low on the paver and do not exceed 1/3 of the paver height from the bottom. Sand infill followed by compacting is recommended while the edge is wet for best results.
4. How much mix does a Perma Pack yield? Open graded base - (1) 1lb Perma Pak per (1) 50-60lb bag of concrete mix = 12ft to 16ft of edging
Dense base - (1) 1lb Perma Pak per (1) 50-60lb bag of concrete mix = 17ft to 21ft of edging
Prop 65 Warning
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, please see www.P65Warnings.ca.gov
Write Your Own Review