Chapin designs their Mixes on Exit™; Spraying System for use with most ATVs, UTVs, and lawn tractors. This system has separate tanks for water and chemicals. The smaller chemical tank features a quick connector that attaches to the larger water tank. The water tank has a drain cap, and both tanks have built-in filters. Choose your desired tank sizes below. Click HERE for additional chemical tanks. The Mixes on Exit™; system operates via a 2-1/5 GPM pump. This pump connects directly to the vehicle battery. An adjustable mix valve allows you to set your required mix range. The included poly nozzle adjusts from a narrow stream to a fine conical mist. You can also switch to a boom setup with the optional boom spray kit. The Chapin Mixes on Exit™; Spraying System allows for spraying on the go. The two-tank setup keeps the water and chemicals separate, keeping the water clean and clear. The mixing valve adjusts from 1 to 15 ounces of concentrate per gallon of water. This wide range means you can use it for a variety of chemicals. The Mixes on Exit™; Spraying System eliminates the waste and mess of premixing your chemicals. The quick-release connector automatically seals the chemical tank when you remove it from the water tank. Having multiple tanks means you can swap out chemicals on the fly. Chapin covers these products with a 1-year warranty!