Underground Root Ball Support Kit, 2-Inch Diameter
In stock
SKU
EK400
$37.95
READ MORE...
Product Information
Product Specs
- Tree diameter (inches): 2
- Weight capacity (pounds): 300
- Ratchet strap length (feet): 20
- Ratchet strap load (pounds): 500
Product Warranty Information
- This product is covered under A.M. Leonard's exclusive 30-Day Down to Earth Guarantee. Click Here for more Details.
Product Features
- Includes 3 pre-assembled #400 earth anchors
- Each anchor includes 20 inches of 1/16-inch wire cable and D-ring attached
- Installation instructions included on packaging
Product Shipping Weight
- 1.3 pounds
Frequently Asked Questions
What is an Underground Root Ball Support Kit?
An Underground Root Ball Support Kit is a 100% underground root ball support system designed by Better Bilt Products, to secure trees and shrubs in place by the root mass. It provides a safer alternative to traditional staking and cabling systems, and is ideal for anchoring plants in locations where staking and cabling is not an option.
What type of plants can the Underground Root Ball Support Kit be used for?
The Underground Root Ball Support Kit can be used for anchoring trees and shrubs with a diameter of up to 2 inches, and that weigh no more than 300 pounds.
What are the components included in the Underground Root Ball Support Kit?
The Underground Root Ball Support Kit includes three pre-assembled earth anchors with wire cables and D rings, and one hand ratchet strap with a length of 20 feet and load capacity of 500 pounds.
How do I install the Underground Root Ball Support Kit?
To install the Underground Root Ball Support Kit, follow these steps: (1) Dig out the area to allow for extra workspace, (2) Drive the earth anchor into the ground until only the cable loop and D-ring remain above ground, (3) Set the anchor by pulling up on the D-ring until there is no additional movement, (4) Position the tree in the center of the anchor points, (5) Thread the strap through the D-rings in the desired pattern, (6) Tighten the strap and backfill.
An Underground Root Ball Support Kit is a 100% underground root ball support system designed by Better Bilt Products, to secure trees and shrubs in place by the root mass. It provides a safer alternative to traditional staking and cabling systems, and is ideal for anchoring plants in locations where staking and cabling is not an option.
What type of plants can the Underground Root Ball Support Kit be used for?
The Underground Root Ball Support Kit can be used for anchoring trees and shrubs with a diameter of up to 2 inches, and that weigh no more than 300 pounds.
What are the components included in the Underground Root Ball Support Kit?
The Underground Root Ball Support Kit includes three pre-assembled earth anchors with wire cables and D rings, and one hand ratchet strap with a length of 20 feet and load capacity of 500 pounds.
How do I install the Underground Root Ball Support Kit?
To install the Underground Root Ball Support Kit, follow these steps: (1) Dig out the area to allow for extra workspace, (2) Drive the earth anchor into the ground until only the cable loop and D-ring remain above ground, (3) Set the anchor by pulling up on the D-ring until there is no additional movement, (4) Position the tree in the center of the anchor points, (5) Thread the strap through the D-rings in the desired pattern, (6) Tighten the strap and backfill.
Write Your Own Review